FITTING (อุปกรณ์ประกอบชุดน้ำ) THERMALTAKE PACIFIC G1/4 OD ADAPTER (CHROME)

FITTING (อุปกรณ์ประกอบชุดน้ำ) THERMALTAKE PACIFIC G1/4 OD ADAPTER (CHROME)

รายละเอียดสินค้าโดยย่อ

Dimension 22 x 19.7 mm

FITTING (อุปกรณ์ประกอบชุดน้ำ) THERMALTAKE PACIFIC G1/4 OD ADAPTER (CHROME)
(#2314513038)

ไม่มีการรับประกัน
ราคา
บาท
300
ราคาล่าสุดเมื่อ 2021-05-26
คุณสมบัติ
Specification
Detail

FITTING THERMALTAKE Pacific G1/4 OD Adapter Chrome
Dimensions : 22 x 19.7 mm


 

รายละเอียดสินค้า

Thermaltake Pacific G1/4 PETG Tube 5/8” (16mm) OD Adapter – Chrome
The Thermaltake Pacific Compression Series provides a complete solution for enthusiast and custom PC builders to meet the needs of setting up a complete water cooling system. With G1/4” durable copper fittings, finished in chrome coatings, take every detail seriously. Only compatible with PETG Tube 5/8” OD to make your system a showcase for all to see with high quality components from Thermaltake.

 

“Tt LCS Certified” is the hallmark that ensures first-class performance from the best features and fitment. A certification exclusive to Thermaltake, it sets the benchmark for all true LCS chassis and is applied only to products that meet our stringent design standards for delivering what hardcore enthusiasts demand. The Tt LCS certification is a way for Thermaltake to designate to all power users the chassis which have been tested for best compatibility with extreme liquid cooling configurations.

 

High-flow and Leak-free Design
Made in Taiwan, the fittings allow proper connection to G1/4” ports, securing properly to cooling components while providing an even seal around the tubing. The fittings are available in chrome and black finishes, include one preinstalled O-ring. Use rigid tubing for all your water cooling needs.

For rigid tubing: Outer diameter: 5/8” (16 mm)

 

Remarkable Expansion
Thermaltake offers a full line of Pacific Series components for enthusiasts to build up aesthetically-superior water cooling systems by incorporating externally-modular upgrades for their chassis.

 

Cautions:
Thermaltake recommends the following steps to be taken after completing your water loop setup

  • It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  • Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  • DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  • Fill the reservoir to the top as it will prevent air from going into the pump
  • If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  • Place some paper towels under fittings and joining points to test for leaks.
  • Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  • Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  • Coolant might fade over time.

 


Source : Thermaltake Pacific G1/4 PETG Tube 5/8" (16mm) OD Adapter - Chrome


 

การให้คะแนนและความคิดเห็น
ให้คะแนนสินค้า
รีวิวสินค้า
เนื้อหาการรีวิว
นามแฝง
คะแนนเฉลี่ยสินค้า
0.0 จาก 5 คะแนน
5 ดาว
4 ดาว
3 ดาว
2 ดาว
1 ดาว
คำอธิบายการรีวิวสินค้า
  • เกณฑ์การให้คะแนนสินค้า
    • 5 ดาว = ยอดเยี่ยม
    • 4 ดาว = ดี
    • 3 ดาว = พอใช้
    • 2 ดาว = ค่อนข้างแย่
    • 1 ดาว = แย่
  • การเขียนเนื้อหาการรีวิว
    • กรุณาอย่าแสดงความคิดเห็นที่ไม่เกี่ยวข้องกับตัวสินค้า
    • กรุณาอย่าแสดงความคิดเห็นที่เจตนาใส่ร้ายป้ายสี ลบหลู่ดูหมิ่นผู้อื่น ผิดกฎหมาย โดยไม่มีแหล่งที่มาที่ชัดเจนจนก่อให้เกิดความเสื่อมเสียแก่บุคคล ทรัพย์สิน และองค์กรต่างๆ
    • กรุณาอย่าแสดงความคิดเห็นข้อความที่หยาบคาย ลามก อนาจาร รวมถึง link ต่างๆ ที่ส่อไปในความหมายที่ไม่เหมาะสม
ความคิดเห็นลูกค้า