| Model |
RG-AP130(W2) |
|
| Radio |
Concurrent dual-band dual-radio |
|
| Protocol |
802.11a/b/g/n, 802.11ac Wave 1, 802.11ac Wave 2 |
|
| Operating Bands |
2.4GHz and 5GHz |
|
| Antenna |
Built-in omnidirectional antenna |
|
| |
2x2 MU-MIMO |
|
| Spatial Streams |
2 |
|
| Modulation |
11b: DSS:[email protected]/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps |
|
| |
11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps |
|
| |
11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM |
|
| |
11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM |
|
| Maximum Transmit Power |
≤100mW (20dBm, transmit power of the RF card only) |
|
| Service Ports |
Front: |
4 10/100/1000M Ethernet ports |
| |
Side: |
1 RJ-45 port (RJ-11 combo) |
| |
Rear: |
1 10/100/1000M uplink port |
| |
|
1 RJ-45 pass-through port (RJ-11 combo) |
| Management Port |
1 console port (Micro USB) |
|
| Lock |
Standard: Anti-theft screws and ordinary screws |
|
| |
Optional: Lock and key |
|
| Color Plate Cover Options |
White, black, silver and gold |
|
| LED Indicators |
1 LED status indicator |
|
| IP Rating |
IP41 |
|
| WLAN |
Maximum clients per AP |
Up to 32 |
| |
BSSID capacity |
Up to 8 per radio |
| |
|
Up to 16 per AP |
| |
SSID hiding |
Support |
| |
Configuring the authentication mode, encryption mechanism, and VLAN attributes for each SSID |
Support |
| |
Remote Intelligent Perception Technology (RIPT) |
Support |
| |
Intelligent identification of smart device |
Support |
| |
Intelligent load balancing based on the number of users or traffic |
Support |
| |
STA control |
SSID/radio-based |
| |
Bandwidth control |
STA/SSID/AP-based speed control |
| Security |
PSK, Web, and 802.1x authentication |
Support |
| |
Data encryption |
WPA (TKIP), WPA2 (AES) , WPA-PSK, and WEP (64 or 128 bits) |
| |
QR code authentication |
Support |
| |
SMS authentication |
Support |
| |
PEAP authentication |
Support |
| |
Data frame filtering |
Support |
| |
User isolation |
Support |
| |
Rogue AP detection and countermeasure |
Support |
| |
Dynamic ACL assignment |
Support |
| |
RADIUS |
Support |
| |
CPU Protection Policy (CPP) |
Support |
| |
Network Foundation Protection Policy (NFPP) |
Support |
| |
Wireless Intrusion Detection System (WIDS) |
Support |
| |
Remote probeFuture release |
Support |
| Routing |
IPv4 address |
Static IP address or DHCP reservation |
| |
Multicast |
Multicast to unicast conversion |
| Location-based Service |
Wireless position tracking |
Support |
| Management and Maintenance |
Network management |
SNMP v1/v2C/v3, Telnet, TFTP, FTP and web management |
| |
Visualized wireless heat map analysis |
Support |
| |
Real-time spectrum analysis |
Support |
| |
Fault detection and alarm |
Support |
| |
Statistics and logs |
Support |
| |
FAT/FIT switching |
The AP working in FIT mode can switch to the FAT mode through the RG-WS wireless AC. |
| |
|
The AP working in FAT mode can switch to the FIT mode through a local console port or Telnet. |
| Dimensions |
(W x D x H) (mm)116 × 86 × 42 |
|
| Weight |
0.23kg |
|
| Installation Mode |
Standard 86-type faceplate installation |
|
| Power Supply |
PoE (802.3af), local DC power supply |
|
| Power Consumption |
<8W |
|
| Temperature |
Operating Temperature: -10°C to 45°C |
|
| |
Storage Temperature: -40°C to 70°C |
|
| Humidity |
Operating Humidity: 10% to 95% (non-condensing) |
|
| |
Storage Humidity: 5% to 95% (non-condensing) |
|
_V2-1.png)
_V2-2.png)
_V2-3.png)
_V2-4.png)
_V2-5.png)
_V2-6.png)
_V2-7.png)
_V2-8.png)
_V2-9.png)