ACCESS POINT (แอคเซสพอยต์) CISCO MERAKI MR44 WIFI 6 INDOOR AP (MR44-HW)

ACCESS POINT (แอคเซสพอยต์) CISCO MERAKI MR44 WIFI 6 INDOOR AP (MR44-HW)

รายละเอียดสินค้าโดยย่อ

4 radios: 2.4 GHz, 5 GHz, dual-band
Embedded WIDS/WIPS and BluetoothⓇ
4-stream UL/DL MU-MIMO 802.11ax (5GHz), 2-stream UL/DL MU-MIMO 802.11ax (2.4GHz)
1 × 2.5 Gbps Multigigabit Ethernet port
PoE: 802.3af/at
AC adapter available
ใช้เวลาในจัดส่งสินค้า 3-5 วัน ไม่เข้าร่วมจัดส่งด่วน 2 ชั่วโมง และ 3 ชั่วโมง

ACCESS POINT (แอคเซสพอยต์) CISCO MERAKI MR44 WIFI 6 INDOOR AP (MR44-HW)
(#VAL3632109241606)

รับประกัน 6 - m
ราคา
บาท
25,440
ราคาล่าสุดเมื่อ 2024-01-17
ส่งฟรี
-
+

ระบุข้อมูลใส่ช่องว่างเพื่อแจ้งเตือนเมื่อมีสินค้าเข้ามา

จำนวนที่ต้องการ

ชิ้น

คุณสมบัติ
Specification
Detail
  • Radios

    • 2.4 GHz 802.11b/g/n/ax client access radio

    • 5 GHz 802.11a/n/ac/ax client access radio

    • 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio

    • 2.4 GHz Bluetooth Low Energy radio with Beacon support

    • Concurrent operation of all four radios

    • Max aggregate frame rate: 3 Gbps

    • Supported frequency bands (country-specific restrictions apply):

      • 2.412-2.484 GHz

      • 5.150-5.250 GHz (UNII-1)

      • 5.250-5.350 GHz (UNII-2)

      • 5.470-5.600, 5.660-5.725 GHz (UNII-2e)

      • 5.1725-5.825 GHz (UNII-3)

  • Antenna

    • Internal Antenna (5.1dBi max gain at 2.4 GHz, 5.9dBi max gain at 5 GHz)

    • Individual antenna elements for each radio

  • 802.11ax, 802.11ac Wave 2, and 802.11n Capabilities

    • DL-OFDMA**, UL-OFDMA**, TWT support**, BSS coloring**

    • 2.4GHz: 2 x 2 multiple input, multiple output (MIMO) with two spatial streams

    • 5GHz: 4 x 4 multiple input, multiple output (MIMO) with four spatial streams

    • SU-MIMO, UL MU-MIMO** and DL MU-MIMO support

    • Maximal ratio combining (MRC) and beamforming

    • 20 and 40 MHz channels (802.11n)

    • 20, 40, and 80 MHz channels (802.11ac Wave 2)

    • 20, 40 and 80 MHz channels (802.11ax)

    • Up to 1024 QAM on both 2.4 GHz and 5 GHz bands

    • Packet aggregation

  • Power

    • Power over Ethernet: 42.5 - 57 V (802.3at) or 37 - 57 V (802.3af) - low power mode ***

    • Alternative 12 V DC input

    • Power consumption: 30W max (802.3at) or 18W max (802.3af) - low power mode ***

    • Power over Ethernet injector and DC adapter sold separately

  • Interfaces

    • 1× 100/1000/2.5G BASE-T Ethernet

    • 1× DC power connector (5.5 mm × 2.5 mm, center positive)

  • Mounting

    • All standard mounting hardware included

    • Desktop, ceiling and wall mount capable

    • Ceiling tile rail (9/16, 15/16, or 1 1/2" flush or recessed rails), assorted cable junction boxes

    • Bubble level on mounting cradle for accurate horizontal wall mounting

  • Physical Security

    • Two security screw options included

    • Kensington lock hard point

    • Concealed mount plate with anti-tamper cable bay

  • Environment

    • Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)

    • Humidity: 5 to 95% non-condensing

  • Physical Dimensions

    • 12.05" × 5.06" × 1.74" (30.6 cm × 12.84 cm × 4.43 cm), not including desk mount feet or mount plate

    • Weight: 26.07 oz (739 g)

** Features can be enabled via future firmware updates
*** Feature can be enabled for required networks

รายละเอียดสินค้า
High Performance 802.11ax Wireless
 
The Cisco Meraki MR44 is a cloud-managed 2x2:2 + 4x4:4 802.11ax access point that raises the bar for wireless performance and efficiency. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR44 offers high throughput, enterprise-grade security, and simple management.
 
The MR44 provides a maximum of 3 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing.
 
With the combination of cloud management, high performance hardware, multiple radios, and advanced software features, the MR44 makes an outstanding platform for the most demanding of uses—including high-density deployments and bandwidth or performance-intensive applications like voice and high-definition video.
MR44 and Meraki Cloud Management
 
Management of the MR44 is performed through the Meraki cloud, with an intuitive browser-based interface that enables rapid deployment without time-consuming training or costly certifications. Because the MR44 is self-configuring and managed over the web, it can be deployed at a remote location in a matter of minutes, even without on-site IT staff.
 
24x7 monitoring via the Meraki cloud delivers real-time alerts if a network encounters problems. Remote diagnostic tools enable immediate troubleshooting over the web so that distributed networks can be managed with a minimum of hassle.
  
The MR44’s firmware is automatically kept up to date via the cloud. New features, bug fixes, and enhancements are delivered seamlessly over the web. This means no manual software updates to download or missing security patches to worry about.
 
 
Product Highlights
•  2x2:2 (2.4GHz) + 4x4:4 (5GHz) MU-MIMO 802.11ax 
 
•  3 Gbps* dual-radio aggregate frame rate
 
•  24x7 real-time WIDS/WIPS and spectrum analytics via dedicated third radio
 
•  Integrated Bluetooth Low Energy Beacon
 
•  Integrated scanning radio
 
•  Enhanced transmit power and receive sensitivity
 
•  Integrated enterprise security and guest access
 
•  Application-aware traffic shaping
 
•  Optimized for voice and video
 
•  Self-configuring, plug-and-play deployment
 
•  Sleek design blends into office environments
 

 

Features
Dual–radio aggregate frame rate of up to 3 Gbps*
 
2.4 GHz 2x2:2 radio and 5 GHz 4x4:4 radio offer a combined dual–radio aggregate frame rate of 3 Gbps*, with up to 2,402 Mbps in the 5 GHz band and 573 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR44 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP.
 
* Refers to maximum over-the-air data frame rate capability of the radio chipset, and may exceed data rates allowed by IEEE 802.11ax operation.
 

Multi User Multiple Input Multiple Output (MU-MIMO)

With support for features of 802.11ax, the MR44 offers MU-MIMO and OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and improves the end user experience.

 

Dedicated third radio delivers 24x7 wireless security and RF analytics

The MR44’s dedicated dual-band scanning and security radio continually assesses the environment, characterizing RF interference and containing wireless threats like rogue access points. There’s no need to choose between wireless security, advanced RF analysis, and serving client data - a dedicated third radio means that all functions occur in real-time, without any impact to client traffic or AP throughput.

     

Bluetooth Low Energy Beacon and scanning radio

An integrated fourth Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. The MR44 enables the next generation of location-aware applications while future proofing deployments, ensuring it’s ready for any new customer engagement strategies.

     

Automatic cloud-based RF optimization

The MR44’s sophisticated and automated RF optimization means that there is no need for the dedicated hardware and RF expertise typically required to tune a wireless network. The RF data collected by the dedicated third radio is continuously fed back to the Meraki cloud. This data is then used to automatically tune the channel selection, transmit power, and client connection settings for optimal performance under even the most challenging RF conditions.

 

Integrated enterprise security and guest access

The MR44 features integrated, easy-to-use security technologies to provide secure connectivity for employees and guests alike. Advanced security features such as AES hardware-based encryption and Enterprise authentication with 802.1X and Active Directory integration provide wired-like security while still being easy to configure. One-click guest isolation provides secure, Internet-only access for visitors. PCI compliance reports check network settings against PCI requirements to simplify secure retail deployments.    

     

Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration

Meraki Systems Manager natively integrates with the MR44 to offer automatic, context-aware security. Systems Manager’s self-service enrollment helps to rapidly deploy MDM without installing additional equipment, and then dynamically tie firewall and traffic shaping policies to client posture.

     

Application-aware traffic shaping                       

The MR44 includes an integrated layer 7 packet inspection, classification, and control engine, enabling the configuration of QoS policies based on traffic type, helping to prioritize mission-critical applications while setting limits on recreational traffic like peer-to-peer and video streaming. Policies can be implemented per network, per SSID, per user group, or per individual user for maximum flexibility and control.

     

Voice and video optimizations

Industry standard QoS features are built-in and easy to configure. Wireless MultiMedia (WMM) access categories, 802.1p, and DSCP standards support all ensure important applications get prioritized correctly, not only on the MR44, but on other devices in the network. Unscheduled Automatic Power Save Delivery (U-APSD) and new Target Wait Time features in 802.11ax clients ensure minimal battery drain on wireless VoIP phones.

     

Self-configuring, self-maintaining, always up-to-date

When plugged in, the MR44 automatically connects to the Meraki cloud, downloads its configuration, and joins the appropriate network. If new firmware is required, this is retrieved by the AP and updated automatically. This ensures the network is kept up-to-date with bug fixes, security updates, and new features.

     

Advanced analytics

Drilling down into the details of network usage provides highly granular traffic analytics. Visibility into the physical world can be enhanced with journey tracking through location analytics. Visitor numbers, dwell time, repeat visit rates, and track trends can all be easily monitored in the dashboard and deeper analysis is enabled with raw data available via simple APIs.

 

อ้างอิงจาก : https://meraki.cisco.com

ทางบริษัทฯ ขอสงวนสิทธิ์ในการรับผิดชอบใดๆ อันเนื่องจากความคลาดเคลื่อนของข้อมูล,ข้อความผิดพลาดทางการพิมพ์ (ผิด/ตก)

 
การให้คะแนนและความคิดเห็น
ให้คะแนนสินค้า
รีวิวสินค้า
เนื้อหาการรีวิว
นามแฝง
คะแนนเฉลี่ยสินค้า
0.0 จาก 5 คะแนน
5 ดาว
4 ดาว
3 ดาว
2 ดาว
1 ดาว
คำอธิบายการรีวิวสินค้า
  • เกณฑ์การให้คะแนนสินค้า
    • 5 ดาว = ยอดเยี่ยม
    • 4 ดาว = ดี
    • 3 ดาว = พอใช้
    • 2 ดาว = ค่อนข้างแย่
    • 1 ดาว = แย่
  • การเขียนเนื้อหาการรีวิว
    • กรุณาอย่าแสดงความคิดเห็นที่ไม่เกี่ยวข้องกับตัวสินค้า
    • กรุณาอย่าแสดงความคิดเห็นที่เจตนาใส่ร้ายป้ายสี ลบหลู่ดูหมิ่นผู้อื่น ผิดกฎหมาย โดยไม่มีแหล่งที่มาที่ชัดเจนจนก่อให้เกิดความเสื่อมเสียแก่บุคคล ทรัพย์สิน และองค์กรต่างๆ
    • กรุณาอย่าแสดงความคิดเห็นข้อความที่หยาบคาย ลามก อนาจาร รวมถึง link ต่างๆ ที่ส่อไปในความหมายที่ไม่เหมาะสม
ความคิดเห็นลูกค้า